Stamp Maker

1 Your design

Choose a picture or drop it here PNG, JPG or SVG. Dark lines on a light background work best.

No design loaded

2 Black and white

Threshold Move it until the flat view shows just your lines, no smudges. Smooth the edges My design is light on a dark background Mirror it, so it reads right on the leather

3 Size

Design width mm Height mm

Relief depth mm Backing plate mm

Border around it mm

4 Taper

Widens the lines toward the backing so thin lines and dots don't snap off. The face that touches the leather keeps your exact design.

Taper angle

Straight tip mm Layer height mm

Keep gaps between lines at least mm deep

Thinnest line you can print mm

5 Download

Print it face up, with the backing plate on the bed.
A 0.2 mm nozzle keeps fine lines crisp.
Set the slicer's layer height to the one above, so the taper steps line up.
Plastic stamps wear quickly: expect one to a few good impressions each.

Choose a picture, or try the sample, to see your stamp here.

Stamp face Taper, at its widest Backing plate Too thin to print Shallow gap Gap kept deep (less taper)

The flat view shows the stamp's face as printed: mirrored, when mirroring is on.